Xerox WorkCentre 5021 Service Documentation

Also see for WorkCentre 5019: Specifications Network addendum User guide

Contents

08/20126-107WorkCentre 5021/5019 6.4.3General ProceduresInitial Issue6.4.3 Error Display during DiagOverview• The error displays that may appear when performing the various Diag functions are as fol-lows.Table 1Diag Function Error Display Meaning RemarksRefer to NVM Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.NVM Settings Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.Err E-5 The Chain-Link # that was input is for an item that cannot be changedErr E-6 The value that was input is out of the valid rangeInitialize NVM Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-7 Failed to initialize the specified areaShutdown History Err E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.Jam Counter Reset Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.HFSI Counter Reset Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.Analog Monitor Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.Component Check Err E-2 The Chain-Link # that was input is incorrect/an unused Chain-Link #/for an option that is not installedErr E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.Tone Up/Down Err E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.ATC Sensor Read Err E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.READ TEMPERTURE Err E-4 Unable to perform the function as the parts that are the target for the Diag are malfunctioning, etc.