CopyingWorkCentre 5300 Series Multifunction PrinterUser Guide1014. To specify different amounts for the edges:a. Touch Individual Edges.b. For each edge, touch the plus or minus (+/–) buttons.c. If you selected 2-sided copies: to specify the amount to erase from each edge on Side 2,touch the plus or minus (+/–) buttons, or touch Mirror Side 1.5. To cancel edge erase, touch Print to Edge.6. To specify the original’s orientation as you place it in the document feeder or on the documentglass, touch Original Orientation, then touch either Upright Image or Sideways Image (top toleft), then touch Save.Note: If preset values such as Hole Punch Erase or Header/Footer Erase were previously saved,you can touch the preset in the lower-left corner of the window.7. Touch Save.Shifting the ImageYou can change the placement of the image on the copy page. This is useful if the image size is smallerthan the page size.Originals must be positioned correctly for image shift to work correctly. For details, see Basic Copyingon page 92.• Document feeder: position originals faceup, left (long) edge entering the feeder first.• Document glass: position originals facedown, in the back-left corner of the document glass, longedge to the left.To change image placement:1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.2. Touch Image Shift.3. To center the image on the page, touch Auto Center.4. To specify the position of the image:a. Touch Margin Shift.b. To specify the amount of Up/Down and Left/Right shift for Side 1, touch the plus or minus(+/–) buttons.c. If you selected 2-sided copies: to specify the amount to erase from each edge on Side 2,touch the plus or minus (+/–) buttons, or touch Mirror Side 1.5. To specify the original’s orientation as you place it in the document feeder or on the documentglass, touch Original Orientation, then touch either Upright Image or Sideways Image (top toleft), then touch Save.Note: If preset values were previously saved, select the preset in the lower-left corner ofthe window.6. Touch Save.
