Xerox WorkCentre XD100 User Manual

Contents

Xerox WorkCentre XD100 User Manual Manual pdf 43 page image

35Single Pass Feeder Misfeed/AutomaticDocument FeederWhen a misfeed occurs in the feeder, the red SPF/ADF misfeed indicatorflashes on the Copier Diagram, and an A1 or A2 status code will flash inthe display window. The status code indicates the number of originals thatmust be returned to the feeder after clearing the misfeed.A1 status code- refeed the last original.A2 status code- refeed the last 2 originals.This code will disappear when copying is resumed or the clear key ispressed.Details for clearing the three types of feeder misfeeds are given below.Input Misfeed1. Open the feeding roller cover and pullthe original gently to the left and out ofthe document feeder tray.2. Close the feeding roller cover.3. Open and close the document cover toclear the misfeed indicator.4. Press Start to continue copying.Exit Misfeed1. Open the document cover and turn theroller knob to remove the misfedoriginal from the exit area.If paper cannot be easily removed, skipto the Roller Misfeed.2. Close the document cover.3. Press Start to continue copying.Roller Misfeed1. Open the document cover and turn theroller knob to remove the misfedoriginal from the document feeder trayor the exit area. If the original is difficultto remove, gently remove it from underthe feeding roller.2. Close the document cover.3. Press Start to continue copying.