Xerox WorkCentre XD100 User Manual

Contents

Xerox WorkCentre XD100 User Manual Manual pdf 59 page image

51Problem SolvingStatus Code ChartStatusCodeSuggested SolutionEnsure that there is paper in the selected paper tray.Ensure that the Paper Tray is closed properly.Paper may not have fed all the way into the WorkCentre.(Refer to Loading Paper and Flashing P.)E2 Copy paper has misfed. (Refer to Clearing the PaperPath.)J1 The toner indicator on the copier diagram will light when thetoner supply is low. Approximately 10 more copies can bemade, but you should have a replacement cartridge instock. When the J1 status code is displayed, the machinewill stop operating until the toner cartridge is replaced.J2 The drum cartridge indicator on the machine diagram lightswhen the drum is near the end of life. Approximately 1,000more copies can be made, but you should have areplacement cartridge in stock. When the J2 status code isdisplayed, the machine will stop operating until the drumcartridge is replaced.C1 The front or side cover is open. Close the cover.CH Install the toner cartridge.A1 – A2 Remove misfed paper from the Single Pass Feeder. Referto A1 – A2 Single Pass Feeder Misfeed/AutomaticDocument Feeder for detailed instructions.L1 Ensure that the shipping screw is removed.E7H2 – H4L3 – L5U2 – U5Switch OFF the Main Power. Wait approximately 5seconds. Switch ON the Main Power. If the status codecontinues, call for service.