Loading the paper traysXDL23/XDL33/XDL33D User Guide 27Bypass trayThe bypass tray allows you to make copies on standard orspecial paper stock. Refer to the appropriate paper stock for thespecific loading procedure. For detailed information on thebypass tray paper specifications, refer to the section entitledPaper.Standard paper stockProcedure:1. Open the bypass tray door.2. Slide out the extension tray until you reach the desiredpaper length.3. Adjust the paper guide to the desired paper width.4. Place only the recommended amount of copy paper intothe tray. Ensure the copy paper is placed along thepaper guide, gently slide the stack into the copier untilthe stack stops.Note: Do not fill the tray above the MAX line.