Making copies34 XDL23/XDL33/XDL33D User GuideMaking copies with mixed-size originalsThe ADF and DADF allows you to copy a stack of originals whichcontain different paper sizes (this stack of originals must be onstandard paper stock).Note: In order to copy a stack of originals which contain differentpaper sizes, you must activate the “Multisheet feeder mixedsizes” special feature (program 32). Refer to the section entitledCustomizing your copier in order to activate this copier setting.Procedure:1. Align the originals at edges A and B (as shown in theillustration to the left).2. Raise the original catch tray.3. Place the stack of originals, face up, in the ADF/DADF;ensure that the stack of originals is in the SEF direction.4. Lower the original catch tray.Note:• In order to have each copy on the same papersize as each original, select 100% and select thepaper supply auto option.• In order to have all the copies on the samepaper size, select the reduce/enlarge autooption and then select a specific paper tray (notauto).• The bypass tray cannot be selected for this copyoperation.5. Select the desired basic and/or added copy features.(Refer to the sections entitled How to use the basiccopying features or How to use the added copyingfeatures.)6. Enter the copy quantity.Note: 99 maximum for 11 and 21 copying30 maximum for 12 and 22 copying7. Press the Start button, .