Problem solvingXDL23/XDL33/XDL33D User Guide 87Status code listThe status code list provides you with a list of all the copier statuscodes, identifies the problem, and provides suggested solutionsfor the code.Follow the suggested solutions until the problem is corrected. Ifthe problem persists, call for service.Status code Problem and suggested solutionsA1-A3 Document misfeed in the ADF/DADF, refer to the appropriate A1-A3 status codeprocedure in the section entitled Clearing the status codes.A5 The ADF/DADF cover is open. Close the cover.A6 Remove originals from the ADF/DADF. Reorder and reload the originals and press theStart button.A8 The ADF/DADF original catch tray is in the raised position. Lower the original catchtray.C1-C4 Paper misfeed, refer to the C1-C4 status code procedure in the section entitledClearing the status codes. If the status code remains perform the E1-E3 status codeprocedure.C8 Paper misfeed, refer to the C8 status code procedure in the section entitled Clearingthe status codes. If the status code remains perform the E1-E3 status code procedure.C9 Paper misfeed in the bypass tray, refer to the C9 status code procedure in the sectionentitled Clearing the status codes.E1-E3 There is a paper misfeed inside the copier or in the paper exit area, refer to the E1-E3status code procedure in the section entitled Clearing the status codes.E5 The copier front cover is open. Close the cover.E6 The copier right upper or right lower cover is open. Close the cover.F1 Remove the misfed sheet in the sorter, refer to the F1 status code procedure in thesection entitled Clearing the status codes.F5 The sorter is unlatched to the copier or the sorter stapler cover is open. Latch thesorter and/or close the sorter stapler cover.F9 • An excessive number of sheets to be stapled by the 10-bin sorter stapler, removethe sets of copies. Reduce the number of sheets and try again.• The stapler is not correctly set in position. Open the sorter front cover and resetthe stapler, refer to the F9 status code procedure in the section entitled Clearingthe status codes.