Getting Started54 Xerox ® VersaLink ® C7020/C7025/C7030 Color Multifunction PrinterUser GuideConnecting to Wi-Fi DirectYou can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,using Wi-Fi Direct. Wi-Fi Direct is disabled by default.Note: Wireless networking is available only on printers with the optional Wireless Network Adapterinstalled.To connect with Wi-Fi Direct, follow the directions provided with your mobile device.Connecting with Wi-Fi Direct from Your Mobile DeviceTo connect with Wi-Fi Direct, follow the directions provided with your mobile device.Connecting to a Telephone LineWARNING: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) orlarger telecommunication line cord.1. Ensure that the printer is powered off.2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port onthe back of the printer.3. Connect the other end of the RJ11 cable to an operating telephone line.4. Power on the printer.5. Enable and configure the Fax functions.Initial Printer SetupBefore installing the printer software, verify that the printer is set up correctly. Setup includes enablingthe optional features and assigning an IP address for the Ethernet network connection. The installationwizard starts automatically the first time the printer is started. The installation wizard prompts theSystem Administrator to configure the following settings:• Language• Network Connection• Proxy Server Setup• Date and Time• Measurements• LDAP Settings• Apps Setup• Security SettingsFor more information on configuring the printer settings, refer to the System Administrator Guide atwww.xerox.com/office/VLC70XXdocs.
