6 Adjustments6.7.3 Related Parameters6-506.7.3 Related ParametersThe following parameters are set automatically. Manual adjustments are not required.6Press the Key. The "Setting f" will change tousual display and the frequency currently displayedwill be set for the vibration suppression function .7 Press the Key to save the settings.8 Press the Key to complete the vibration suppres-sion function. The screen in step 1 will appear again.Step Display after Operation Keys Operation㧾㨁㧺 ̆ 㨂㨕㨎 㧿㨡㨜̆㧹㨑㨍㨟㨡㨞㨑 㨒㧩㧜㧝㧜㧚㧠㧴㨦㧿㨑㨠㨠㨕㨚㨓 㨒㧩㧜㧝㧞㧚㧠㧴㨦ErrorForcereference㧰㧻㧺㧱 ̆ 㨂㨕㨎 㧿㨡㨜̆㧹㨑㨍㨟㨡㨞㨑㨒 㧩㧙㧙㧙㧙㧙㧴㨦㧿㨑㨠㨠㨕㨚㨓㨒 㧩㧜㧝㧞㧚㧠㧴㨦㧾㨁㧺 ̆ 㧲㨁㧺㧯㨀㧵㧻㧺̆㧲㨚㧞㧜㧠㧲㨚㧞㧜㧡㧲㨚㧞㧜㧢㧲㨚㧞㧜㧣No settings related to the vibration suppression function will be changed during opera-tion.If the motor does not stop approximately 10 seconds after the setting changes, a timeouterror will result and the previous setting will be enabled again.The vibration suppression function will be enabled when the parameter is set in step 6.The motor response, however, will change when the motor comes to a stop with no refer-ence input.Parameter NamePn140 Model Following Control SelectionPn141 Model Following Control GainPn145 Vibration Suppression 1 Frequency APn146 Vibration Suppression 1 Frequency B
