YASKAWA SI-ES3 Installation Manual

Also see for SI-ES3: Installation manual Technical manual

Contents

5 Mechanical & Electrical Installation16 YASKAWA TOEPYEUOEC101A EtherCAT Option Installation Manual◆ Installing the Option on a GA700A - Insertion for CN5 connectorB - Option cardC - Screws (included)D - Drive front coverE - LED labelF - KeypadG - Option terminal block (CN1)H - LED Status Ring boardI - Connector CN5-AJ - Connector CN5-B (Not for com-munication option installation)K - Connector CN5-C (Not for com-munication option installation)Figure 5.6 GA700 Components with Option CardThe procedures for removing and re-attaching the front cover of the inverter drives, and for removing the LEDStatus Ring board, differ by model. For detailed information please refer to the Technical Manual of the inverterdrive. Communication option cards can only be inserted into the CN5-A connector located on the drive controlboard.1. Affix the LED label (E) in the appropriate position on the drive front cover (D).Figure 5.7 Affix the LED Label2. Turn off the power. Wait until the CHARGE LED turns off and then remove the cover. Refer to the drivemanual for direction on removing the front cover.CKGJIBADEFHDE