YASKAWA SI-ES3 Installation Manual

Also see for SI-ES3: Installation manual Technical manual

Contents

5 Mechanical & Electrical Installation18 YASKAWA TOEPYEUOEC101A EtherCAT Option Installation Manual8. Install the keypad to the drive after replacing the keypad connector and then the keypad connector. At thattime, insert the keypad connector tab into the drive.9. Reattach and secure the front cover of the drive (D) including the keypad (F).Figure 5.11 Reinstall the Front Cover and Keypad10. Switch on the drive power supply.◆ Installing the Option on a Q2AA - Insertion for CN5 connectorB - Option cardC - Screws (included)D - Drive front coverE - LED labelF - KeypadG - Option terminal block (CN1)H - USB port boardI - Connector CN5-AJ - Connector CN5-B (Not for com-munication option installation)K - Connector CN5-C (Not for com-munication option installation)Figure 5.12 Q2A Components with Option CardThe procedures for removing and re-attaching the front cover of the inverter drives, and for removing the USBport board, differ by model. For detailed information please refer to the Technical Manual of the inverter drive.Communication option cards can only be inserted into the CN5-A connector located on the drive control board.HDFTabKeypadconnector