YASKAWA VIPA System 200V Manual

Also see for VIPA System 200V: Manual

YASKAWA VIPA System 200V Manual Manual pdf 44 page image

Chapter 3 Deployment CPU 21x-2BS03 Manual VIPA System 200V3-6 HB97E - CPU - RE_21x-2BS03 - Rev. 15/16Hardware configuration - CPUFor the project engineering of the CPU 21x and the other System 200Vmodules connected to the same VIPA bus, the hardware configurator fromSiemens is to be used.To address the directly plugged peripheral modules, you have to assign aspecial address in the CPU to every module.The address allocation and the parameterization of the modules takesplace in the Siemens SIMATIC manager as a virtual PROFIBUS system.For the PROFIBUS interface is standardized software sided, thefunctionality is guaranteed by including a GSD-file into the SiemensSIMATIC manager.Transfer your project into the CPU via the MPI interface.The following conditions must be fulfilled for project engineering:• The Siemens SIMATIC manager is installed at PC respectively PU• The GSD files have been included in Siemens hardware configurator• Serial connection to the CPU (e.g. MPI-Adapter)Note!The configuration of the CPU requires a thorough knowledge of theSiemens SIMATIC manager and the hardware configurator!• Go to www.vipa.com > Service > Download > PROFIBUS GSD files anddownload the file System_100V_-_200V_Vxxx.zip.• Extract the file to your work directory. The vipa_21x.gsd (German)respectively vipa_21x.gse (English) can be found at the directoryCPU21x.• Start the Siemens hardware configurator and close every project.• Go to Options > Install new GSD file• Navigate to the directory CPU21x and choose the corresponding filevipa_21x.gsd (German) or vipa_21x.gse (English)Now the modules of the VIPA System 200V are integrated in the hardwarecatalog at PROFIBUS-DP \ Additional field devices \ I/O \VIPA_System_200V.OverviewRequirementsIncluding theGSD-file