Page 13FT-410 O peraTiOn Manuali nsTallaTiOnvl-1000 l iNeAr Amplifier iNtercoNNectioNBe sure that both the FT-410 and VL-1000 are turned off, then follow the installation recommendationscontained in the illustration.Note Please refer to the VL-1000 Operating Manual for details regarding amplifier operation. Please do not attempt to connect or disconnect coaxial cables when your hands are wet.ANTANT 1ANT 2ANT 3ANT 4REMOTEONOFFBAND DATA 1BAND DATA 2GNDALC 2ALC 1PTT 2PTT 1 INPUT 1INPUT 2CONTROLDC48V INANTINPUTDC 13.8 VANT 1HF Vertical AntennaHF Dipole AntennaHF Beam AntennaANT 2ANT 3INPUT 2BAND-DATA 2GNDGNDDC 48V INCONTROLALC 2CT-118 CONNECTION CABLE (Option)ANTENNA CABLE (Not Supplied )VP-1000VP-1000LINEARTo link the FT-410 and VL-1000Power switches, set the VL-1000 RE-MOTE switch to the “ON” position.Set the front panel’sINPUT switch to the“INPUT2”.