Page 25FT-410 O peraTiOn ManualMeMOry O peraTiOnr eGulAr memory operAtioNErasing Memory Channel Data1. Press the [V/M] button, if necessary, to enter theMemory mode.2. Rotate the [MAIN DIAL] knob to select the memorychannel that you would like to erase.3. Press and hold the [M-CLR] button to erase thecontents of the selected memory channel. Thedisplay will revert to memory channel 1.Memory Tune OperationYou may freely tune off of any memory channel in the “Memory Tune” mode, this is similar to VFO operation.So long as you do not over-write the contents of the current memory, Memory Tune operation will not alterthe contents of the memory channel.1. Press the [V/M] button, if necessary, to enter theMemory mode.2. Rotate the [MAIN DIAL] knob. You will now observethat the memory channel’s frequency is changing.3. Press and hold the [V/M] button for one second.During Memory Tune operation, you may changeoperating modes, and engage and offset theClarifier, if desired.4. Press the [V/M] button momentarily to return to theoriginally-memorized frequency of the current memory channel. One more press of the [V/M] button willreturn you to VFO operation.14.195.000M-012[MAIN DIAL] knob[MENU] button [V/M] button[M-CLR] button14.195.000M-012[MAIN DIAL] knob[V/M] button