Yaesu FT-450D Operation Manual

Also see for FT-450D: Operating manual Brochure & specs Operation manual Technical supplement Manual

Page 64 FT-450D OPERATION MANUALMEMORY OPERATIONHOME C HANNEL M EMORIESTwo one-touch “Home” channels are available, for special frequencies you use often.The HF band Special “Home” channel default is 29.300 MHz or 29.600 MHz, FM. The 50 MHz band “Home”channel default is 50.100 MHz, 51.000 MHz, or 52.525 MHz, FM (depends on the transcever’s version).Home Channel Recall1. Press the [F] button, followed by the [RCL/HOME]button to recall the Home Channel on the bandgroup where you currently are operating (HF or50 MHz). The “HOME” notation appears in the dis-play.2. Press the [F] button, followed by the [RCL/HOME]button to return to the previous-used frequency(either a VFO or a memory channel).The transceiver switches to VFO mode if either the[DSP/SEL] knob or [MAIN DIAL] knob is turned. (InAM/FM modes the menu item “A&FDIAL” should beset to “ON” for the [MAIN DIAL] to be active).Home Channel Frequency ChangeThe factory default for the Home Channel is 29.300 MHz, FM for HF band and 51.000 MHz, FM for 50 MHzband. You can re-program the Home Channel in a manner identical to that used for the regular memories:1. In the VFO mode, select the desired frequency,mode, and status the way you want to have itstored.2. Press the [F] button followed by the [V/M/MW]button.The blinking current memory channel number willbe shown on the display, and the contents of thecurrent memory channel will be shown on the dis-play.If there is no action by you within 10 second fromreleasing the [V/M/MW] button the Memory Stor-age procedure is canceled.The memory storage procedure is canceled un-less you operate it within 10 seconds3. Press the [RCL/HOME] button momentarily tostore the frequency and other data into the HomeChannel. A double beep will confirm that you haveheld the [RCL/HOME] button in long enough.[DSP/SEL] Knob[RCL/HOME] button[F] button[MAIN DIAL] Knob[V/M/MW] button[F] button[RCL/HOME] button