Yaesu FT-4VR Advance Manual

Also see for FT-4VE: Operating manual

114. Press the [p] key or [q] key to select the memory channel number registered instep 1.5. Press the [P2] key.• The beep sounds, Split memory channel is registered.• While recalling the Split memory channel, “ ” and “ ”will appear.Semi-Duplex Memory Display6. Press the PTT switch to save the setting and return tonormal operation.While operating the Split Memory, press the Function key, then press the [P2] key to reverse thetransmit and receive frequencies temporarily. When reversing the frequencies, “ ” and “ ” blink.Using Memory TagMemory name tags (up to 6 characters) may be assigned or changed on the memorychannels or PMS memory channel.1. Press the [ MR] key to recall the memory channel to assign the name tag.2. Press and hold the function key, then press the [p] key or [q] key to select the SetMode “21 MEM.TAG”.3. Press the Function key.The character input screen is displayed.4. Use the numeric key to input the characters.• Inputting charactersExample quickly Pressing the [2] key, each time switches the following characters:2 → A → B → C → a → b → c → 2 →・・・• Moving the cursor[p] key: Moves the cursor to the right[q] key: Moves the cursor to the left5. Press and hold the Function key.• The memory tag is registered to the Memory Channel and return to upper SetMode item.6. Press the PTT switch to return to the Memory Channel mode.The memory name tag registered to the channel is automatically displayed as the memory tagindication.Changing between name tag display and frequency display (Memory Tune)The memory tag display may change the frequency display temporarily and tune offtemporarily (Memory Tune).1. Recall the Memory channel to be changed.2. Press the [ MR] key.“tun” will appear and the [ MR] key will toggle between the Memory tag and the fre-quency display. During the frequency display, Press the [p] key or [q] key to tune tothe desired frequency.