Yaesu FT-4VR Advance Manual

Also see for FT-4VE: Operating manual

21Transmitting the Registered DTMF Code1. Press the Function key, then press the [9] key to togglebetween the “AUTO” and “MANUAL”. Select the “AUTO”.Display DescriptionAUTO The registered DTMF code is automatically transmitted.MANUAL The DTMF code may be transmitted manually by pressing each numerickey.2. While pressing the PTT switch, press a numeric [1] to [9] key to DTMF memory num-ber registered in “Setting the DTMF Memory”.• The DTMF code registered in the DTMF memory channel is automatically trans-mitted.• Even after releasing the PTT switch, the transmission continues until theDTMF code is completed. The transceiver is automatically returned to receivemode.Manually Transmitting the DTMF Code1. Set “MANUAL” reffering to the above “Transmittingthe Registered DTMF Code”.2. While pressing and holding the PTT switch to transmit, press each correspondingkey to send the DTMF code:[0] to [9] key: 0 to 9[▲] key： A[▼] key： B[P1] key： C[P2] key： D[ MR] key: Û[#VFO] key: #The transmission may continue for two seconds after releasing the PTT switch.