Yaesu FT-4VR Advance Manual

Also see for FT-4VE: Operating manual

12The Memory Channel Only ModeThe FT-4VR/VE may be set to operated only in the registered memory channels.1. Press and hold the MONI/T.CALL key and the PTT switch simultaneously, while turn-ing the transciever ON.2. Press the [▲] or [▼] key to select the “F5 M-ONLY”.3. Press the Function key.• The memory channel only mode is ON, the previously selected memory channel isrecalled.• Pressing the [▲] or [▼] key may be selected the memory channel.• Inputting the 3 digits of the memory channel using the numeric keys may be re-called the memory channel directly.z In the memory only mode, the following functions will not operate:• Changing the VFO mode (Press the [#VFO] key)• Memory Tune (Press the [ MR] key)• Program Memory scan (Press the Function key, and then press the [#VFO] key)• Recalling the Home channel• Reverse function (Press the Function key, and then press [P2] key)• DTMF autodialer settingz In the memory only mode, press the Function key to change the squelch level.z In the memory only mode, press and hold the Function key to change the transmit output level.Canceling Memory Only Mode1. Turn the transceiver OFF, and then press and hold the MONI/T.CALL key and thePTT switch simultaneously to, while turning the transciever ON again. The memorychannel only mode OFF.