Yaesu FT-65R Operating Manual
Also see for FT-65E: Instruction manualOperating manualAdvance manualQuick manualQuick start guide
                                                    | |
Contents
| 
Memory Storage1. Select the desired frequency, while operating in the VFO mode.Be sure to set up any desired CTCSS or DCS tones, as well as any de-sired repeater offset. The power level may also be set at this time, if youwish to store it.2. Press and hold the [ V/M] key.A blank memory channel will be displayed automatically.3. If it is desired to change to another channel number, press the [▲] or [▼]key.4. Press the Alphabet / Numeric keys to inputcharacters and create a “Tag” (label) for thememory channel.If not inputting a “Tag” (label), proceed to step 5.• To move the cursor to the next character, press the F key.• To correct a mistake, press the F key repeatedly until thecursor returns to the character position.For more details on the character/symbol, see page 38.5. Press and hold the [ V/M] key to store the frequency and settings into theselected memory channel.“MEM-IN” on the display will blink twice and the tone will sound to com-plete the memory setting.30Memory ModeFT-65R/FT-65E Operating Manual |
Related manuals for Yaesu FT-65E
manualsdatabase
Your AI-powered manual search engine