Yaesu FT-65R Operating Manual
Also see for FT-65E: Instruction manualOperating manualAdvance manualQuick manualQuick start guide
                                                    | |
Contents
| 
When an alpha-numeric Tag is shown in place of thememory channel operating frequency display, the displaywill automatically revert to display the operating frequen-cy along with the “tun” indication. It is not necessary toenter the Menu and change from the alpha-numeric Tagdisplay to the operating frequency display.3. Press the [▲] or [▼] key to tune to the desired frequency.4. To return to the original memory frequency, just press the [#BAND] key.The display will revert to a display of the alpha-numeric Tag (if any) thatmay have originally appeared on the LCD.To store the new frequency while using Memory Offset Tun-ing, press and hold the [ V/M] key (per the normal memorystorage procedure). The next-available clear memory locationwill be displayed. Then press and hold the [ V/M] key againto save the new frequency the available memory channel.Deleting MemoriesAll excerpt the Memory Channel “001” and the Home Channels may be easi-ly deleted.Once deleted, the channel data cannot be recovered, somake a note of the information (Memory Channel settings,etc), before deleting the memories.1. Press and hold the F key to enter the Set Mode.2. Press the [▲] or [▼] key to select Set Mode item “18 MEM DEL”.3. Press the F key to enable adjustment of this Item.4. Press the [▲] or [▼] key to select the memo-ry channel to be “deleted”.5. Press the F key to delete the selected mem-ory channel.6. Press the PTT switch to return to normal operation.33Memory ModeFT-65R/FT-65E Operating Manual |
Related manuals for Yaesu FT-65E
manualsdatabase
Your AI-powered manual search engine