Yaesu FT-8800R Operating Manual

Also see for FT-8800R: Operating manual Brochure & specs Operating manual Technical supplement Operating manual

Contents

INTRODUCTIONYaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 10 of 83REV Key: while in Key Mode 2• Press this key momentarily to reverse the transmit and receive frequencies on theMain band during split-frequency (i.e. Repeater) operation.• Press and hold in this key for ½ second to change the frequency shift direction:RPT – (minus shift) RPT + (plus shift) RPT OFF (simplex)TONE Key: while in Key Mode 2• Press this key momentarily to change the Tone Squelch mode:ENC (CTCSS Encoder) ENC.DEC (CTCSS Tone Squelch) DCS (DCSoperation)SUB Key: while in Key Mode 2• Press this key momentarily to activate the Sub band function (the icon willblink on the Sub band). When the Sub band function is activated, any keys you pressact on the Sub band.• When the Sub band function is activated (the icon is blinking on the Sub band),press this key momentarily to deactivate the Sub band function.(6) SET Key• Press this key momentarily to enter the Set (Menu) mode.• Press and hold in this key for ½ second to transfer the contents of the Main band VFOinto a Memory register.