OPERATE THROUGH REPEATERSYaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 29 of 83Manual Repeater Shift ActivationIf the ARS feature has been disabled, or if you need to set a repeater shift direction other thanthat established by the ARS, you may set the direction of the repeater shift manually.To set repeater shift manually:1. Press the SET key momentarily to enter the Set mode.2. Rotate the DIAL knob to select Menu #33 RPT.MOD.3. Press the DIAL knob momentarily, then rotate the DIAL knob to select thedesired shift from –, +, and OFF.4. Press and hold in the DIAL knob for ½ second to save the new setting and exit tonormal operation. 0.Changing the Default Repeater ShiftsIf you travel to a different region, you may need to change the default repeater shift so as toensure compatibility with local operating requirements.To do this, follow the procedure below:1. Press the SET key momentarily to enter the Set mode.2. Rotate the DIAL knob to select Menu #36 SHIFT.3. Press the DIAL knob momentarily, then rotate the DIAL knob to select thenew repeater shift magnitude.4. Press and hold in the DIAL knob for ½ second to save the new setting and exit tonormal operation. 0.If you just have one odd split that you need to program, don’t change the default repeatershifts using this Menu item. Enter the transmit and receive frequencies separately, as shown inStore Independent Transmit Frequencies on page 38.
