REGULAR MEMORYYaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 38 of 83Store Independent Transmit FrequenciesTo store independent transmit frequencies (odd splits) in a memory channel:1. Store the receiving frequency using the instructions described in Store a Frequencyin Memory on page 36.2. Turn to the desired transmit frequency on the Main band, then press and hold in theSET key for ½ second.3. Within ten seconds of pressing the SET key, use the DIAL knob ormicrophone’s and buttons to select the same memory channel number asused in step 1 above.4. Press and hold in the PTT switch, then press the SET key momentarily whileholding the PTT switch to save the entry and exit to normal operation. (This will notcause transmission; instead, it signals the microprocessor that a separate transmitfrequency is being programmed into that memory register.) 0. Whenever you recall a memory which contains independently-storedtransmit and receive frequencies, the (odd split) indicator will bedisplayed.Recall a Stored MemoryTo recall (activate) a stored memory channel:1. If operating in the VFO mode, press the key momentarily to enter the Memorymode.2. Rotate the DIAL knob to select the desired channel. 0. When the radio is already set to the Memory mode, an easy way to recallmemories is enter the three-digit memory channel number from theMH−48A6J microphone's keypad. For example, to recall memory channel#4, press 0 0 4.
