Yaesu FT-8800R Operating Manual

Also see for FT-8800R: Operating manual Brochure & specs Operating manual Technical supplement Operating manual

12 FT-8800R Operating Manual1 “Left” DIAL knobThis 20-position detented rotary switch is the tuning dial for the “left” band. Press thisknob momentarily to switch the “Main band” to be the “left” band.When the “left” band is set to be the “Main band” in the VFO mode, press this knob toenable rapid tuning (in 1 MHz steps) using this knob.Press and hold in this knob for 1/2 second to toggle the operating band on the “left”side as follows:144 MHz Æ 250 MHz Æ 350 MHz Æ 430 MHz Æ 850 MHz Æ 144 MHz ......2 “Left” VOL SQL KnobThe inner VOL (Volume) control adjusts the speaker audio level form the “left” re-ceiver. Clockwise rotation increases the audio level.Press this knob momentarily to switch the Internet Connection feature “on” and “off.”The outer SQL (Squelch) control is used to silence background noise on the “left”receiver. It should be advanced clockwise just to the point where the noise is silenced(and the “ ” indicator on the display turns off), so as to provide the best sensitivityto weak signals.3 Hyper Memory Buttons ([1] ~ [6])Press and hold in one of these buttons for 2 seconds to store the current total configu-ration of the radio into a special “Hyper” memory bank.Press the appropriate button momentarily to recall the desired “Hyper” memory.FRONT PANEL CONTROLS & SWITCHES1 46523LOWSQL SQLVOL VOLLOW V/M HM SCNV/M HM SCNKEY2PWR12874365