Yaesu FT-8800R Operating Manual

Also see for FT-8800R: Operating manual Brochure & specs Operating manual Technical supplement Operating manual

61FT-8800R Operating ManualMenu #1 [APO]Function: Selects the Automatic Power Off time (time before power goes off).Available Values: OFF/0.5 H – 12.0 H in 0.5 hour multiples.Default: OFF (Disables the APO feature)Menu #2 [ARS]Function: Activates/deactivates the Automatic Repeater Shift feature.Available Values: ON/OFFDefault: Depends on the band of operation.Menu #3 [ARTS]Function: Selects the ARTS beep mode.Available Values: IN RNG/OUTRNGIN RNG: Activates the ARTS feature; a high tone beep will sound when the transceiverfirst detects that you are within range, and a low beep will sound when the otherstation goes out of range.ALWAYS: Activates the ARTS feature; a high tone beep will sound every time a pollingtransmission is received from the other station, and a low beep will sound oncewhen the other station goes out of range.Menu #4 [BAND]Function: Enables/disables the VFO Band edge for the current band.Available Values: BND ON/BND.OFFDefault: BND ONBND ON: When the VFO frequency reaches the high band edge of the current band, theVFO frequency will jump to the low band edge of the current band (or viceversa).BND.OFF: When the VFO frequency reaches the high edge of the current band, the VFOfrequency will jump to the low band edge of the next band (or vice versa).Menu #5 [BEEP]Function: Enables/disables the beeperAvailable Values: BEP. ON/BEP.OFFDefault: BEP. ONMenu #6 [CLK.SFT]Function: Shifting of CPU clock frequency.Available Values: SFT. ON/SFT.OFFDefault: SFT.OFFThis function is only used to move a spurious response “birdie,” should it fall on a desiredfrequency.MENU (“SET”) M ODE