Yaesu FT-8800R Operating Manual

Also see for FT-8800R: Operating manual Brochure & specs Operating manual Technical supplement Operating manual

34 FT-8800R Operating ManualMemory Recall1. While operating in the VFO mode, press the [V/M] key momentarily to enter the Memorymode.2. Rotate the DIAL knob to select the desired channel.3. To return to the VFO mode, press the [V/M] key momentarily again.When the radio is already set to the Memory mode, an easy way to recall memoriesis to enter the microphone’s key in the memory channel number. For example, torecall memory channel #4, press [0] Æ [0] Æ [4].Memory Offset TuningOnce you have recalled a particular memory channel, you may easily tune off that channel,as though you were in the “VFO” mode.1. With the FT-8800R in the “MR” (Memory Recall) mode, select the desired memorychannel.2. Now press and hold in the [SCN] key for 1/2 second; the “MT” icon will appear on thedisplay.3. Rotate the DIAL knob, as desired, to tune to a new frequency. The synthesizer stepsselected for VFO operation on the current band will be the steps used during MemoryTuning.4. Press and hold in the [V/M] key for 1/2 second during Memory Tuning, the data willnow have been copied to VFO, although the original memory contents will remainintact on the previously-stored channel.5. If you wish to return to the original memory frequency, press the [V/M] key momen-tarily. The “MT” icon will disappear.Deleting MemoriesWith 1052 memories available (except memory channel “1”), there frequently are situa-tions where you may desire to delete certain memorized frequencies. The procedure fordeleting a channel is quite simple:1. Press the [V/M] key, if needed, to enter the Memory mode.2. Press and hold in the [SET] key for 1/2 second, then rotate the “Main” band DIAL knobto select the memory channel to be deleted. Note that memory channel #1 may not bedeleted.3. Press the “Main” band [SCN] key momentarily. The display will revert to memorychannel #1. If you rotate the “Main” band DIAL knob to the location you just “Masked,”you will observe that it is now invisible.Note: Once deleted, the channel data cannot be recovered.MEMORY O PERATIONREGULAR MEMORY C HANNEL OPERATION