Yaesu FT-8800R Operating Manual

Also see for FT-8800R: Operating manual Brochure & specs Operating manual Technical supplement Operating manual

49FT-8800R Operating ManualTo speed at which the DTMF digits are sent can be changed. Three speed levels are avail-able: 50 ms (High: 20 digits per second), 75 ms (Mid: 13 digits per second), and 100 ms(Low: 10 digits per second).To select the speed, use the following procedure:1. Press the [SET] key momentarily to enter the Set mode.2. Rotate the “Main” band DIAL knob to select Menu #14 (DTMF SDTMF SDTMF SDTMF SDTMF S).3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIALknob to select the desired speed.4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new settingand exit to normal operation.You can also set a longer delay between the time you press the [HM] key (with PTT switchpressed) and the first DTMF digit is sent.To set a delay time, use the following procedure:1. Press the [SET] key momentarily to enter the Set mode.2. Rotate the “Main” band DIAL knob to select Menu #13 (DTMF DDTMF DDTMF DDTMF DDTMF D).3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIALknob to select the desired time (5050505050/250250250250250/450450450450450/750750750750750/10001000100010001000 ms).4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new settingand exit to normal operation.DTMF AUTODIALER O PERATION