Yaesu FT-8900R Operating Manual

Also see for FT-8900R: Brochure & specs Operating manual Technical supplement

Contents

REGULAR MEMORYYaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK) Page 33 of 773. Within ten seconds of pressing the SET key, use the DIAL knob, or themicrophone’s and buttons, to select the desired memory channel forstorage. If the channel is already occupied by data stored previously, the channel'sfrequency will appear on the display.4. Press the SET key momentarily to save the entry and exit to normal operation.0.Create a Name Tag for a Memory ChannelTo add an Alpha-numeric Name Tag to a memory:1. Press the SET key momentarily to enter the Set mode.2. Rotate the DIAL knob to select Menu #25 NAME.3. Press the DIAL knob momentarily to select the first character location. Thecharacter at this location will blink.4. Rotate the DIAL knob to select the apha-numeric character you wish to store inthe blinking location, then press the DIAL knob momentarily to move on to thenext character.5. Again rotate the DIAL knob to select the desired letter, number, or symbol, thenpress the DIAL knob momentarily to move on to the next character location. Ifyou make a mistake, press the microphone’s button to move back to the previouscharacter slot, then re-select the correct letter, number, or symbol.6. Repeat step 5 to program the remaining letters, numbers, or symbols of the desiredName Tag. A total of six characters may be used in the creation of a tag.7. When you have completed the creation of the Name Tag, press and hold in the SETkey momentarily to save the tag and exit to normal operation.0.To modify an Alpha-numeric Name Tag for a memory:1. Press the SET key momentarily to enter the Set mode.2. Rotate the DIAL knob to select Menu #25 NAME.3. Press the DIAL knob momentarily to display the Name Tag.4. Press the DIAL knob momentarily to select the first character location. Thecharacter at this location will blink.5. Press the microphone’s and buttons to move to the character location youwant to modify, rotate the DIAL knob to select the apha-numeric character youwish to store in the blinking location, then press the DIAL knob momentarily tomove on to the next character location.