MENU ITEMSYaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK) Page 62 of 77Item # Menu Function Available Values Default24 MUTE Selects the Audio Mute mode. OFF, TX, RX,TX/RXOFFb 25 NAME Stores an Alpha-Numeric ―Tag‖ for a memory channel.h 26 PKT.S Sets the transceiver’s circuitry for the Packet baud rate tobe used.1200BPS, 9600BPS 1200BPsh 27 PKT.B Sets the receiving band for Packet operation. MAIN, R-FIX, L-FIX MAIN28 PG P1 Programs the MH−48A6J microphone’s P1 button. BAND, VFO/MR,SCAN, SQL.OFF,TCALL, RPTR, PRI,LOW, TONE, MHz,REV, HOMEBAND29 PG P2 Programs the MH−48A6J microphone’s P2 button. VFO/MR30 PG P3 Programs the MH−48A6J microphone’s P3 button. TONE31 PG P4 Programs the MH−48A6J microphone’s P4 button. LOW32 RF SQL Sets the RF SQL threshold level. OFF, S-2, S-5, S-9,S-FULLOFFb 33 RPT.MOD Sets the Repeater Shift Direction. RPT.OFF, RPT. – ,RPT.+RPT.OFF34 SCAN Selects the Scan-Resume mode. TIME, BUSY TIMEb 35 SCAN M Selects the Memory Scan mode. MEM, MSM MEMb 36 SHIFT Sets the magnitude of the Repeater Shift. 0.00 – 99.50 MHz variesb 37 STEP Sets the Synthesizer steps. 5.0k, 10.0k, 12.5k,15.0k, 20.0k, 25.0k,50.0kvaries38 SPCONT Defines the audio path to an external speaker. EXT, OFF, INT.EXT,INTEXTb 39 TONE F Sets the CTCSS Tone Frequency. 100 HZb 40 TONE M Selects the Tone Encoder and/or Decoder mode. OFF, ENC,ENC.DEC, DCSOFF41 TOT Sets the Time-Out Timer. 1 – 30 minutes, OFF 6MINh 42 VFO.TR Enables/disables the VFO Tracking feature. ON, OFF OFFb 43 WID.NAR Sets the MIC Gain (and Deviation). WIDE, NARROW varies44 X-RPT Enables/disables the Cross-Band Repeater feature.b 45 AM Enables/disables the AM mode. ON, OFF OFFh 46 AUT.AM Selects the receiving mode. AUTO, OFF AUTO