Yaesu FT-8900R Operating Manual

Also see for FT-8900R: Brochure & specs Operating manual Technical supplement

Contents

REGULAR MEMORYYaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK) Page 36 of 77Delete a MemoryWith 808 memories available (except memory channel #1), there are frequently situationswhere you may desire to delete certain memorized frequencies. The procedure for deleting achannel is quite simple:1. If operating in the VFO mode, press the key momentarily to enter the Memorymode.2. Press and hold in the SET key for ½ second, then rotate the DIAL knob toselect the memory channel to be deleted. (Note that memory channel #1 may not bedeleted.)3. Press the Main band key momentarily. The display will revert to memory channel#1. If you rotate the DIAL knob to the location you just Masked, you willobserve that it is now invisible. 0. Once deleted, the channel data cannot be recovered.Set a HOME Channel for an Operating BandA special one-touch HOME channel is available (one for each of the six operating bands), toallow quick recall of a favorite operating frequency on each band. To store a HOME channel:1. Select the desired frequency while operating in the VFO mode on the Main band. Besure to set up any desired CTCSS or DCS tones, as well as any desired repeater offset.The power level may also be set at this time.2. Press and hold in the SET key for ½ second. A memory number will appear(blinking) on the display.3. While the memory channel number is blinking, press the key. Thefrequency and other data will now be stored in the special HOME channel register. 0.You may repeat this process on the other operating bands.To recall the HOME channel, just press the key while operating either in the VFO orMemory mode.