13CW Mode OperationFT-891 Advance ManualMessage Memory Programming with the Optional FH-2 (Using the Keyer Paddle)1. Set the operating mode to CW.2. Set the “BK-IN” feature to “OFF”.3. Turn the internal Electronic Keyer “ON”.4. Press the [MEM] key on the FH-2. A blinking“REC” icon will appear in the display.5. Press any of the FH-2 keys numbered[1] through [5] to begin the memory stor-age process, and the “REC” icon will glowsteadily.6. Send the desired message using the keyerpaddle.NOTE: If you do not start keying within tenseconds, the memory storage pro-cess will be canceled.7. Press the [MEM] key on the FH-2 oncemore at the end of your message. Up to 50characters may be stored in each of the fivememories.NOTE: Care must be exercised whensending to ensure that the spacesbetween letters and words are ac-curately done; if the timing is off,the spacing may not come out rightin the stored message. For ease insetting up the keyer memories, werecommend setting Menu item “04-01 [KEYER TYPE]” to “ACS” (Au-tomatic Character Spacing) whileprogramming the keyer memories.
