18CW Mode OperationFT-891 Advance ManualText Message Programming from the FT-891 Control Panel1. Set the operating mode to CW.2. Press the [F] key repeatedly, to find the“REC SETTING” list screen.NOTE: This screen may be enabled/disabled via Menu Mode “05-11[REC SETTING]”.3. Rotate the MULTI function knob to select“MEM”.4. Press the MULTI function knob. A blinking“REC” icon will appear in the display.5. Rotate the MULTI function knob to selectany channel [CH1] through [CH5].6. Press the MULTI function knob. The “CWTEXT” screen will appear.7. Press the [B](EDT) key. The text inputscreen will appear.8. Rotate the MULTI function knob to select the letters, numbers, or symbols of the de-sired label, then press the MULTI function knob.9. Press the MULTI function knob.10. Repeat step 8 and 9 to program the remaining letters, numbers, or symbols of thedesired text. Up to 50 characters may be stored in each of the five memories.r Rotate the MULTI function knob to set the cursor position and press the [B](CE)key to erase and input characters.11. When text entry is complete, press the [C](ENT) key.12. Press the [A](BCK) key to exit the text input screen.13. Press and hold the [F] key for one second to exit the “REC SETTING” list screen andresume normal operation.
