19CW Mode OperationFT-891 Advance ManualText Message Programming with the Optional FH-21. Set the operating mode to CW.2. Press the [MEM] key on the FH-2. A blinking“REC” icon will appear in the display.3. Press any of the FH-2 keys numbered [1]through [5], to select the desired CW Mem-ory Register that you wish to program withtext.4. Press the [MEM] key on the FH-2. The textinput screen will appear.5. Rotate the MULTI function knob to selectthe letters, numbers, or symbols of the de-sired label, then press the MULTI functionknob.6. Press the MULTI function knob.7. Repeat step 5 and 6 to program the remaining letters, numbers, or symbols of thedesired text. Up to 50 characters may be stored in each of the five memories.r Rotate the MULTI function knob to set the cursor position and press the [B](CE)key to erase and input characters.8. When the message is complete, add the “}” character at the end to signify the termi-nation of the message.9. When the text entry is complete, press the [B](ENT) key.10. Press and hold the FH-2 [MEM] key for one second to exit the text input screen andresume normal operation.
