20CW Mode OperationFT-891 Advance ManualChecking the CW Memory Contents from the FT-891 Front Control Panel1. Set the operating mode to CW.2. Set the “BK-IN” feature to “OFF”.3. Press the [F] key repeatedly, to find the“FUNCTION-1” list screen.4. Rotate the MULTI function knob to select“MON”.5. Press the MULTI function knob, the Monitorlevel pop-up screen will appear.6. Rotate the MULTI function knob to set theMonitor volume level (0 - 100).7. Press the MULTI function knob or the [F]key.8. Press the [F] key repeatedly, to find the“REC SETTING” list screen.NOTE: This screen may be enabled/disabled via Menu Mode “05-11[REC SETTING]”.9. Rotate the MULTI function knob to select a memory [CH1] - [CH5] that was previouslyrecorded.10. Press the MULTI function knob to hear the CW message played in the sidetone mon-itor. No RF energy will be transmitted.11. Press and hold the [F] key for one second to exit the “REC SETTING” list screen andresume normal operation.
