87Menu ModeFT-891 Advance Manual09-01 FM MIC SELECTFunction: Selects the microphone input jack for FM mode.Available Values: MIC/REARDefault: MICDescription: Selects the microphone input jack to be used in FM mode.MIC: Inputs from the MIC jack on the front panel.REAR: Disables the microphone circuit on the front panel and inputs fromthe RTTY/DATA jack on the rear panel.09-02 FM OUT LEVELFunction: Sets the level of the FM receiving signal output from the RTTY/DATA jack.Available Values: 0 - 100Default: 5009-03 PKT PTT SELECTFunction: Sets the PTT control for the FM signal.Available Values: DAKY/RTS/DTRDefault: DAKYDescription: Selects the PTT control method for the FM signal.DAKY: Controls the transmit from the RTTY/DATA jack (pin 3) on the rearpanel.RTS: Controls the transmit from the USB virtual COM/RTS ports.DTR: Controls the transmit from the USB virtual COM/DTR ports.09-04 RPT SHIFT 28MHzFunction: Sets the RPT offset frequency on the 28 MHz band.Available Values: 0 - 1000 (kHz)Default: 100kHzDescription: Sets the repeater offset frequency on the 28 MHz band.09-05 RPT SHIFT 50MHzFunction: Sets the RPT offset frequency on the 50 MHz band.Available Values: 0 - 4000 (kHz)Default: 1000kHzDescription: Sets the repeater offset frequency on the 50 MHz band.
