19Connecting to a Faraway Station Using WIRES-X2 Speak into [MIC]Tip Place the microphone about 5 cm away from your mouth when you speak.Caution Do not continuously transmit over an extended period of time to reduce the risk ofoverheating, malfunction, or injury.3 Release pThe FT1DR/DE will return to receive mode.Disconnecting from a node or roomWhile pressing p, press the #99999 (DTMF disconnection command) key.Various display functionsConfirming the digital node locationWhen the signal from the local node you are connected to contains GPS locationinformation, you can display the location data on the screen.While viewing the connection destination screen, press F, and while F is displayedon the destination screen, press M to display the compass screen. The direction anddistance from the present station to the local node will be displayed.Press M again to return to the connection destination screen.䢶䢵䢲䢰 䢺䢲䢲䢢 䣆䣐䣌䣓䢳䣛䣄䣉䢯䣐䣆䢳䢢䢢䣕䣊䣋䣐䣃䣉䣃䣙→M←䢢 䣚 䢢 䢶 䢵 䢲 䢰 䢺 䢲 䢲䢢 䣎 䣐 䢢 䢢 䢢 䢢 䢢䢶 䢵 䢰 䢲 䣭 䣯Y R M YL1 L 2TipWhen [NUMERIC] is selected from [1 DISPLAY] → [2 TARGET LOCATION] in the setting mode, thelatitude & longitude screen appears instead of the compass screen.Confirming the frequencyOn the WIRES-X screen, press V to change to the frequency display screen that wasdisplayed before using WIRES-X. Press V again to return to the WIRES-X screen.