33Connecting to a Faraway Station Using WIRES-X● Listening to a routine message1 Follow steps 1 to 4 in “Viewing text data in a node or room on the Internet” to displaythe data type select screen2 Rotate O to select [VOICE]3 Press HThe data list will appear.Tip The list will show data in reverse chronological order.䢢 䢢 䣆 䣑 䣙 䣐 䣎 䣑 䣃 䣆䢢 䢢 䢢 䢢 䢢 䢢 䢢䣘 䣑 䣋 䣅 䣇䢢 䢢 䢢 䢢 䢢 䢢 䢢䣏 䣇 䣕 䣕 䣃 䣉 䣇䢢 䢢 䢢 䢢 䢢 䢢 䢢 䣒 䣋 䣅 䣖4 Rotate O to select an audio file5 Press HAudio playback will start and the title of the audio file willflash.When playback stops, the data list will appear again.䢢 䢢 䣘 䣑 䣋 䣅 䣇䢢 䢢 䢢 䢢 䢢 䣌 䣃 䢳 䣜 䣔 䣎 䢯 䢹 䢺 䢻 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢳 䢺 䢼 䢴 䢷䢢 䢢 䢢 䢢 䢢 䣌 䣓 䢳 䣛 䣄 䣈 䢯 䣃 䣄 䣅 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢳 䢵 䢼 䢳 䢳䢢TipDuring audio playback, press M to display the sender’s location information when the audio file wasrecorded.Transmitting messages and imagesYou can transmit data such as messages (text data) and images saved on the microSDcard inserted into the FT1DR/DE, to a local node, or a node or room on the Internet. Youcan also create a new message and transmit it.Tips• For details on microSD cards, refer to “Mounting and dismounting microSD memory card” in thebasic operating manual.• You can also transmit photos taken with the camera that is built into the optional speakermicrophone “MH-85A11U”. For details on how to take photos, refer to “Taking picture with theoptional camera mounted on speaker microphone” in the basic operating manual.Transmitting data to a local node● Creating and transmitting a message1 Follow steps 1 to 5 in “Viewing text data in a local node” to display the upload ordownload select screen2 Rotate O to select [UPLOAD]3 Press HThe data type select screen will appear.䢢 䢢 䢢 䢢 䣐 䣇 䣙 䣕 䢢 䣕 䣖 䣃 䣖 䣋 䣑 䣐䢢 䢢 䣀 䣀 䣌䣓䢳䣛䣄䣉䢯䣐䣆䢳 䢢 䢾 䢾䢢 䢢 䢢 䣗 䣒 䣎 䣑 䣃 䣆䢢 䢢 䢢 䣆 䣑 䣙 䣐 䣎 䣑 䣃 䣆