36Connecting to a Faraway Station Using WIRES-X4 Rotate O to select [UPLOAD]5 Press HThe data type select screen will appear.䢢 䢢 䢢 䢢 䣐 䣇 䣙 䣕 䢢 䣕 䣖 䣃 䣖 䣋 䣑 䣐䢢 䢢 䣀 䣀 䣌䣃䢴䣛䣕䣑䢯䣐䣆䢴 䢢 䢾 䢾䢢 䢢 䢢 䣗 䣒 䣎 䣑 䣃 䣆䢢 䢢 䢢 䣆 䣑 䣙 䣐 䣎 䣑 䣃 䣆6 Follow steps 4 to 11 in “Creating and transmitting a message” under “Transmittingdata to a local node” to create and transmit a message● Transmitting a saved message or image1 Follow steps 1 to 5 in “Creating and transmitting a message” to display the data typeselect screen2 Follow steps 2 to 7 in “Transmitting a saved message or image” under “Transmittingdata to a local node” to select and transmit dataTransmitting an audio messageYou can transmit audio messages spoken into the microphone as data to a local node,or node or room on the Internet.Audio files are categorized into the following 2 types.EMERGENCY: Emergency information. Depending on the node or roomsettings, mandatory updates will be supplied to connected nodesand rooms in 5-minute intervals for 2 hours starting from theinitial dissemination of the news.NEWS STATION:(LOCAL NEWS)Routine message. You can listen to the message anytime youwant as long as the message is not deleted from the node orroom.Transmitting data to a local node● Transmitting emergency information1 Follow steps 1 to 5 in “Viewing text data in a local node” to display the upload ordownload select screen2 Rotate O to select [EMERGENCY] 䣌䣓䢳䣛䣄䣉䢯䣐䣆䢳䢢䢢䣕䣊䣋䣐䣃䣉䣃䣙䢢䢢䢢䢢䣇䣏䣇䣔䣉䣇䣐䣅䣛䢢䢢䢢䢢䣐䣇䣙䣕䢢䣕䣖䣃䣖䣋䣑䣐3 Press and hold p[EMG UPLOAD?] is displayed and a 3-second beep canbe heard.Tip Releasing p will cancel upload of emergencyinformation.䢢 䢢 䢢 䢢 䣇 䣏 䣇 䣔 䣉 䣇 䣐 䣅 䣛䢢 䣇 䣏 䣉 䢢 䣗 䣒 䣎 䣑 䣃 䣆 䣁