26Connecting to a Faraway Station Using WIRES-XImporting imagesYou can import images transmitted/received by either a local node, or a node or roomon the Internet onto the FT1DR/DE transceiver.Cautionsz To import images, insert a microSD card into the FT1DR/DE in advance. For details, refer to “Usinga microSD memory card” in the basic operating manual.z Imported images cannot be viewed on the FT1DR/DE. To view images after importing, remove themicroSD card from the FT1DR/DE, and then view the data on the card using a PC, etc.Importing images from a local node1 Follow steps 1 to 7 in “Viewing text data in a local node” to display the data typeselect screen2 Rotate O to select [PICT]3 Press HThe data list will appear.Tip The list will show data in reverse chronological order.䢢 䢢 䣆 䣑 䣙 䣐 䣎 䣑 䣃 䣆䢢 䢢 䢢 䢢 䢢 䢢 䢢䣘 䣑 䣋 䣅 䣇䢢 䢢 䢢 䢢 䢢 䢢 䢢䣏 䣇 䣕 䣕 䣃 䣉 䣇䢢 䢢 䢢 䢢 䢢 䢢 䢢 䣒 䣋 䣅 䣖4 Rotate O to select an image5 Press HThe image data information will appear.䢢 䢢 䣒 䣋 䣅 䣖䢢 䢢 䢢 䢢 䢢 䣌 䣃 䢳 䣜 䣔 䣎 䢯 䢹 䢺 䢻 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢳 䢸 䢼 䢳 䢷䢢 䢢 䢢 䢢 䢢 䣌 䣓 䢳 䣛 䣄 䣈 䢯 䣃 䣄 䣅 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢳 䢴 䢼 䢲 䢸䢢6 Rotate O to select [DOWNLOAD]7 Press HData import will start and [DOWNLOAD] will flash.䣶 䣱 䢼 䣛 䣃 䣇 䣕 䣗 䢯 䣅 䣃 䣏 䣒䢢 䢢 䢴 䢲 䢳 䢶 䢱 䢲 䢶 䢱 䢲 䢶 䢢 䢳 䢹 䢼 䢵 䢴䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢴 䢸 䣍 䣄䢢 䢢O↓䣶 䣱 䢼 䣛 䣃 䣇 䣕 䣗 䢯 䣅 䣃 䣏 䣒䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢢 䢳 䢴 䢼 䢲 䢸䣆 䣑 䣙 䣐 䣎 䣑 䣃 䣆After data import completes, [Completed] will appear, and then the data list willappear again.Tips • Data in unsupported formats cannot be imported. In such a case, [Not Completed] willappear, and then the screen will return to the data type select screen.• When the microSD card does not have enough free space, data cannot be imported. In sucha case, [Memory is full] will appear, and then the screen will return to the data type selectscreen.