Yaesu FTA-720 Operating Manual

Contents

FTA-720 OperATing MAnuAl8B eFore you BegInPrecautions The FTA-720 is capable of two-way communica-tion on channels used for critical aviation safetycommunications. Therefore, it is important that thisradio be kept away from children or other unauthor-ized users at all times. When making DC connections via the (optional) E-DC-5B DC cable, be absolutely certain to observethe proper voltage level and polarity guidelines. Donot connect this radio directly to any 24 ~ 28 VoltDC source, nor to AC power of any kind. Connect-ing the FTA-720 directly to a source which exceeds15.0 Volts DC will result in damage to the unit. Do not dispose of the Li-Ion Battery Pack in a fire.Do not carry a Li-Ion Battery Pack in your pocket,where keys or coins could short the terminals. Thiscould create a serious fire/burn danger, and possiblycause damage to the Li-Ion pack.How to Install the Quick Draw Belt Clip Connect the hanger to the rear of the FTA-720, withthe notch pointing directly up, using the suppliedscrew (Fig 1). Use only the screw included with theclip to mount the clip to the back of the FTA-720! Clip the Quick-Draw Belt Clip onto your belt (Fig 2). To install the FTA-720 into the Quick-Draw BeltClip, align the hanger with the Quick-Draw BeltClip, and slide the FTA-720 into its slot until a clickis heard (Fig 3). To remove the FTA-720 from the Quick-Draw BeltClip, rotate the FTA-720 180 degrees, then slide theFTA-720 out from the Quick-Draw Belt Clip (Fig 4).Fig 1Fig 2 Fig 3 Fig 4