Basic components15EMU26090Main switchThe main switch controls the ignition system;its operation is described below. “ ” (off)With the main switch in the “ ” (off) posi-tion, the electrical circuits are off, and the keycan be removed. “ ” (on)With the main switch in the “ ” (on) posi-tion, the electrical circuits are on, and the keycannot be removed. “ ” (start)With the main switch in the “ ” (start) po-sition, the starter motor turns to start the en-gine. When the key is released, it returnsautomatically to the “ ” (on) position.EMU26141Power trim and tilt switch on remotecontrol or tiller handleThe power trim and tilt system adjusts theoutboard motor angle in relation to the tran-som. Pressing the switch “ ” (up) trims theoutboard motor up, then tilts it up. Pressingthe switch “ ” (down) tilts the outboard mo-tor down and trims it down. When the switchis released, the outboard motor will stop in itscurrent position.NOTE:For instructions on using the power trim andtilt switch, see pages 35 and 37.
