Operation30tank cap, loosen it 2 or 3 turns.2. If there is a fuel joint on the motor, firmlyconnect the fuel line to the joint. Thenfirmly connect the other end of the fuelline to the joint on the fuel tank.3. If a steering friction adjuster is providedon your outboard motor, securely attachthe fuel line to the fuel line clamp.NOTE:During engine operation place the tank hori-zontally, otherwise fuel cannot be drawnfrom the fuel tank.4. Squeeze the primer pump with the outletend up until you feel it become firm.EMU27490Starting engineEMU27592Electric start / prime start models1. Place the gear shift lever in neutral.NOTE:The start-in-gear protection device preventsthe engine from starting except when in neu-tral.2. Attach the engine stop switch lanyard toa secure place on your clothing, or yourarm or leg. Then install the lock plate onthe other end of the lanyard into the en-ZMU02295ZMU03100ZMU02024ZMU02025
