Operation42should supply oil normally. If no oil isflowing after 10 minutes of idling, consultyour Yamaha dealer.NOTICEECM00130Be sure to take the above steps when op-erating the engine after a long period ofstorage. Otherwise engine seizure couldoccur.EMU36954Install top cowling1. Be sure that the cowling lock lever is re-leased.2. Be sure that the rubber seal is seated allthe way around the top cowling.3. Place the top cowling on the bottomcowling.4. Check to be sure the rubber seal is seat-ed correctly between the top cowlingand the bottom cowling.5. Move the lever to lock the cowling asshown. NOTICE: If the top cowling isnot installed correctly, water sprayunder the top cowling can damagethe engine, or the top cowling canblow off at high speeds. [ECM01991]After installing, check the fitting of the topcowling by pushing it with both hands. If thetop cowling is loose, have it repaired by yourYamaha dealer.EMU34581Power trim and tilt systemWARNINGEWM01930● Never get under the lower unit while itis tilted, even when the tilt support leveris locked. Severe injury could occur ifthe outboard motor accidentally falls.● Body parts can be crushed between themotor and the clamp bracket when themotor is trimmed or tilted.● Be sure no one is near the outboardmotor before performing this check.1. Check the power trim and tilt unit for anysign of oil leaks.ZMU03367ZMU06109ZMU04678
