Components21EMU26261Trim rod (tilt pin)The position of the trim rod determines theminimum trim angle of the outboard motor inrelation to the transom.EMU26341Tilt support lever for power trim andtilt modelTo keep the outboard motor in the tilted upposition, lock the tilt support lever to theclamp bracket.NOTICEECM00660Do not use the tilt support lever or knobwhen trailering the boat. The outboardmotor could shake loose from the tilt sup-port and fall. If the motor cannot be trail-ered in the normal running position, usean additional support device to secure itin the tilt position.EMU26372Top cowling lock lever(s) (turn type)To remove the engine top cowling, turn thelock lever(s) and lift off the cowling. When in-stalling the cowling, check to be sure it fitsproperly in the rubber seal. Then lock thecowling again by returning the lever(s) to thelock position.1. Trim tab2. Bolt3. CapBolt tightening torque:36.0 Nm (3.6 kgf-m, 26 ft-lb)ZMU03852ZMU03853
