Operation35should supply oil normally. If no oil isflowing after 10 minutes of idling, consultyour Yamaha dealer.NOTICEECM00130Be sure to take the above steps when op-erating the engine after a long period ofstorage. Otherwise engine seizure couldoccur.EMU36490Flushing deviceCheck that flushing device’s garden hoseconnector is securely screwed on to the fit-ting on the bottom cowling. NOTICE: If theflushing device is not properly connect-ed, cooling water can leak out and the en-gine can overheat during operation.[ECM01800]EMU36961Install cowling1. Be sure that all cowling lock levers arereleased.2. Be sure that the rubber seal is seated allthe way around the engine.3. Place the cowling on top of the seal.4. Check to be sure the rubber seal fits cor-rectly all the way around the engine.5. Move the levers to lock the cowling asshown. NOTICE: If the cowling is notinstalled correctly, water spray underthe cowling can damage the engine,or the cowling can blow off at highspeeds. [ECM01990]After installing, check the fitting of the topcowling by pushing it with both hands. If thetop cowling is loose, have it repaired by yourYamaha dealer.1. Flushing deviceZMU03367ZMU038571ZMU06118ZMU04678