Yamaha 90A Owner's Manual

Also see for 60F: Service manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Yamaha 90A Owner's Manual Manual pdf 31 page image

Instruments and indicators25EMU26712Fuel gaugeEight segments indicate the fuel level. Whenall segments are showing, the fuel tank isfull.The fuel level reading can be inaccurate dueto by the position of the sensor in the fueltank and the attitude of the boat in the water.Operation with bow-up trim or continuousturning can give false readings.Do not adjust the selector switch for fuel sen-sor. Incorrectly setting the selector switch onthe gauge will give false readings. Consultyour Yamaha dealer on how to correctly setthe selector switch. NOTICE: Running outof fuel can damage the engine. [ECM01770]EMU36071Trip meter / Clock / VoltmeterThe display shows either the trip meter, theclock, or the voltmeter.To change the display, press the “ ”(mode) button repeatedly until the indicatoron the face of the gauge points to “ ” (tripmeter), “ ” (clock), or “ ” (voltmeter).EMU26691Trip meterThis gauge displays the distance the boathas traveled since the gauge was last reset.The trip distance is shown in kilometers ormiles depending upon the unit of measure-ment selected for the speedometer.To reset the trip meter to zero, press the “ ”(set) and “ ” (mode) buttons at the sametime.The trip distance is kept in memory by bat-tery power. The stored data will be lost if thebattery is disconnected.EMU26701ClockTo set the clock:1. Be sure the gauge is in the “ ” (time)mode.2. Press the “ ” (set) button; the hour dis-play will begin blinking.3. Press the “ ” (mode) button until thedesired hour is displayed.4. Press the “ ” (set) button again, theminute display will begin blinking.1. Cap2. Selector switch (for speed unit)3. Selector switch (for fuel sensor)ZMU01745