Operation462. After stopping the engine, disconnectthe fuel line if there is a fuel joint on theoutboard motor.3. Tighten the air vent screw on the fueltank cap (if equipped).4. Remove the key if the boat will be leftunattended.TIP:The engine can also be stopped by pullingthe cord and removing the clip from the en-gine shut-off switch, then turning the mainswitch to “ ” (off).EMU27862Trimming outboard motorWARNINGEWM00740Excessive trim for the operating condi-tions (either trim up or trim down) cancause boat instability and can makesteering the boat more difficult. This in-creases the possibility of an accident. Ifthe boat begins to feel unstable or is hardto steer, slow down and/or readjust thetrim angle.The trim angle of the outboard motor helpsdetermine the position of the bow of the boatin the water. Correct trim angle will help im-prove performance and fuel economy whilereducing strain on the engine. Correct trimangle depends upon the combination ofboat, engine, and propeller. Correct trim isalso affected by variables such as the load inthe boat, sea conditions, and running speed.ZMU03870ZMU02301
