Operation47EMU27885Adjusting trim angle (Power trim andtilt)WARNINGEWM00753● Be sure all people are clear of the out-board motor when adjusting the trimangle. Body parts can be crushed be-tween the motor and the clamp bracketwhen the motor is trimmed or tilted.● Use caution when trying a trim positionfor the first time. Increase speed gradu-ally and watch for any signs of instabil-ity or control problems. Improper trimangle can cause loss of control.● If equipped with a power trim and tiltswitch located on the bottom cowling,use the switch only when the boat is ata complete stop with the engine off. Donot adjust the trim angle with thisswitch while the boat is moving.Adjust the outboard motor trim angle usingthe power trim and tilt switch.To raise the bow (trim-out), press the switch1. Trim operating angleZMU0310911. Power trim and tilt switch1. Power trim and tilt switch1. Power trim and tilt switchUPDNZMU031101UPDNZMU057931
