63P3F11 5-44123456789Checking the crankshaft1. Check the teeth of the crankshaft gearfor cracks or wear. Replace the crank-shaft if necessary.2. Measure the crankshaft journal diametera, crankpin diameter b, and crankpinwidth c. Replace the crankshaft if out ofspecification.3. Measure the crankshaft runout. Replacethe crankshaft if out of specification.Connecting rod big end sideclearance a:0.14–0.31 mm (0.006–0.012 in)Crankshaft journal diameter a:51.980–52.000 mm(2.0465–2.0472 in)Crankpin diameter b:49.980–50.000 mm(1.9677–1.9685 in)Crankpin width c:22.00–22.10 mm(0.8661–0.8701 in)Crankshaft runout limit:0.03 mm (0.0012 in)S63P5550Cylinder block
