63P3F11 5-5412345678916. Apply sealant to the mating surface ofthe balancer assembly.NOTE:Do not get any sealant inside the balancerassembly.17. Install the balancer assembly onto thecrankcase, and then tighten the balancerassembly bolts to the specified torques intwo stages and in the sequence shown.18. After installing the balancer assemblyonto the crankcase, apply sealant aroundthe periphery of the seals C, and theninstall them onto the balancer assembly.19. Align the oil pump gear with the crank-shaft, and then install the oil pump D.NOTE:• Before installing the oil pump, be sure to fillit with a small amount of engine oil throughthe oil passage i.• When installing the oil pump, install it sothat the oil seal does not get damaged.T R..1–0 Balancer bolt (M8):1st: 18 N·m (1.8 kgf·m, 13.3 ft·lb)2nd: 31 N·m (3.1 kgf·m, 22.9 ft·lb)A, B Balancer bolt (M6):1st: 7 N·m (0.7 kgf·m, 5.2 ft·lb)2nd: 13 N·m (1.3 kgf·m, 9.6 ft·lb)S63P5A90iiDCylinder block
